Table of Contents
Advertisement
Setting Sounds
The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or
error occurs. You can set the volume of each of these sounds individually.
◼
Adjusting <Fax Volume>
1
Press the
2
Use the slider to set volume, select <Apply>.
●
To mute the sound, move the cursor all the way to the left.
◼
Adjusting <Other Volume Set.>
1
Press the
2
Select <Other Volume Set.>.
3
Select a setting.
<Ring Tone>
<TX Done Tone>
<RX Done Tone>
<Scanning Done Tone>
Basic Operations
(
) key.
(
) key.
Setting
Sound produced when an incoming fax is
received
Sound produced when fax sending is
complete
Sound produced when fax receiving is
complete
Sound produced when fax original
scanning is complete
Description
181
6C6U-03C
Procedure
Go to step 4.
Advertisement
Table of Contents
