Scanning and Saving to a Computer
The sequence of "scanning an original and saving it to a computer" can only be done when scanning from the
machine. Scan while specifying what computer originals will be saved to; whether to scan originals in color or black
and white; whether to save originals as PDFs or JPEGs; and other settings. Incidentally, if you want to specify a
computer connected to the network as the destination, you must register the machine with the computer in advance
(
Preparing to Use the Machine as a Scanner(P. 84) ).
1
Place the original(s).
2
Select <Scan> in the Home screen.
●
When the login screen appears, enter your user name and password and set up the authentication server.
Logging in to Authorized Send(P. 129)
3
Select <Computer> in the Scan Basic Features screen.
Screen(P. 291)
●
If only a computer connected to the machine via USB is used, proceed to step 5.
4
Select the destination computer.
5
Select the scan type on the Computer Scan Basic Features screen.
Screen for Computer Scanning(P. 291)
●
The scan types and settings that are displayed can be confirmed and changed by using MF Scan Utility. For
more information, click [Instructions] on MF Scan Utility.
●
If you are a macOS user, see the manuals for the relevant drivers or software on the online manual
website.
6
Select <Start>.
➠
Scanning of the original starts.
●
If you want to cancel, select <Cancel>
●
You cannot scan while the ScanGear MF is displayed. Close
the screen before scanning.
Scanning
Placing Originals(P. 130)
Home Screen(P. 117)
<Yes>.
Canceling Sending Documents(P. 310)
295
Scan Basic Features
Basic Features
6C6U-05K