Table of Contents
Advertisement
Once the ignition is switched on, the COMPATROL
compaction system will perform a function test.
All LEDs (1) light up.
Compacting
Bring the gas lever (1) into full-throttle position.
Control drive speed and direction of travel with the handle (1).
Only run machine within reach of the manual guidance
rod.
The green LED (1) will be illuminated as soon as the
operating frequency has been reached, indicating that the
COMPATROL
compaction measurement system is ready
®
for operation.
During the compaction work compaction is continuously
measured and displayed visually via the yellow LEDs 1 – 7
(2). Maximum possible compaction is reached as soon as
there is no noticeable increase in the illuminated LEDs.
CR 6 CCD 2.0
®
1
1
1
2
1
17
Advertisement
Table of Contents
