Step 1. Verify The Shipment - Agilent Technologies 8753ET Installation And Quick Start Manual

STEP 1. Verify the Shipment

1. Unpack the contents of all the shipping containers. WARNING: The analyzer weighs
approximately 46 pounds (21 kilograms). Use correct lifting techniques.
2. Carefully inspect the analyzer to ensure that it was not damaged during shipment.
NOTE
If your analyzer was damaged during shipment, contact your nearest Agilent
Technologies office or sales representative. A list of Agilent Technologies sales and
service offices is provided in
ES models only: the PORT 1 and PORT 2 connectors move. This is NOT a
defect.
Chapter 1
Table 2-1 on page 2-27
Installing Your Analyzer
STEP 1. Verify the Shipment
.
1-3