Calibrating The Touchscreen Lcd; Figure; Procedure; Using The Camera Lamp As A Flash - FLIR T420 User Manual

13 Handling the camera
5. Select Compass and push the joystick.
6. Select Compass. If the Compass check box is unchecked, push the joystick to enable
the compass.
7. Select Calibrate compass and push the joystick. Follow the on-screen instructions.
Note You must rotate the camera slowly.

13.12 Calibrating the touchscreen LCD

13.12.1 Figure

13.12.2 Procedure

Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
3. Push the joystick to display the Settings menu.
4. Select Device settings and push the joystick.
5. Select Set up camera and push the joystick.
6. Select Calibrate touchscreen and push the joystick.
7. Calibrate the touchscreen by tapping the five crosshairs that appear on the screen us-
ing a stylus pen specially designed for capacitive touch usage.
8. When completed, push the joystick.

13.13 Using the camera lamp as a flash

13.13.1 General

The camera lamp can be used as a flash for the digital camera. When the flash function is
activated, the camera lamp will flash when an image is saved by pushing the Autofocus/
Save button fully down.
13.13.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
3. Push the joystick to display the Settings menu.
4. Select Device settings and push the joystick.
5. Select Set up camera and push the joystick.
#T559879; r. AO/35410/35410; en-US
(Settings).
(Settings).
32