Week Timer Menu - Atlas Copco GA 37+ Instruction Book

Instruction book
Text on figure
(1)
(2)
(3)
• Using the scroll keys (1), move the cursor to the info icon (see above, section Menu icon)
• Press the enter key (2), the Atlas Copco internet address appears on the screen.
3.15

Week timer menu

Control panel
Menu icon, week timer
Function
• To program time-based start/stop commands for the compressor
• To program time-based change-over commands for the net pressure band
• Four different week schemes can be programmed.
• A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week in the
cycle, one of the four programmed week schemes can be chosen.
Procedure
Starting from the Main screen (see
• Move the cursor to the action button Menu and press the enter key (2), following screen appears:
9096 3321 00
Configuration
Pressure Settings
Main screen
Main screen):
59