Instruction book
Function
If necessary, the operator can program two different setpoints. This menu is also used to select the active
setpoint.
Procedure
Starting from the Main screen (see
• Move the cursor to the action button Menu and press the enter key (2), following screen appears:
Text on figure
(1)
(2)
(3)
• Move the cursor to the setpoint icon (see above, section menu icon) using the scroll keys (1)
• Press the enter key (2), following screen appears:
Text on figure
(1)
(2)
(3)
9096 3321 00
Main
screen):
Configuration
Pressure Settings
Main screen
Pressure setting
Unloading pressure 1
Loading pressure 1
53