Week Timer Menu - Atlas Copco GA 30+ Instruction Book

Text on image
(1)
(2)
• Using the Scroll keys, move the cursor to the Info icon (see above, section Menu icon).
• Press the Enter key. The Atlas Copco internet address appears on the screen.

4.15 Week timer menu

Menu icon, Week timer
Function
• To program time based start/stop commands for the compressor
• To program time based changeover commands for the net pressure band
• Four different week schemes can be programmed.
• A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week in the
cycle, one of the four programmed week schemes can be chosen.
Procedure
Starting from the Main screen (see
• Move the cursor to the action button Menu and press the Enter key. Use the Scroll buttons to select
the Timer icon.
96
Menu
Regulation
Important remark:
In the Elektronikon you can select different timers on one day (up to 8 actions). It is
however not possible to program 2 actions at the same time. The solution: leave at least
1 minute in between 2 actions.
Example: Start Compressor: 5.00 AM, Pressure Setpoint 2: 5.01 AM (or later).
Main screen),
Instruction book
2920 7180 30