Elation PIXEL DRIVER 4000 V3 User Manual page 20

SYSTEM MENU
MODE
sACN CONTROL MODE
SET UP UP/DOWN
sACN Out x
DMX Universe Set
u:xxxxx
sACN Out x
Pixel Bar xxx IP
sACN Out x
xxx IP Number xx
Pixel Bar Setup
sACN Out x
xx X xx RGB Pixels
SACN Out x
DMX Address xxx
sACN Out x
LED Tape 170
sACN Out x
Pixel Count: xxx
LED Tape Setup
sACN Out x
Groups: xxx X xxx
sACN Out x
DMX Address xxx
sACN Out x
Pixel Wash 40IP
sACN Out x
40IP Number xx
Pixel Wash 40IP
Setup
sACN Out x
xx X xx RGBW Pixels
sACN Out x
DMX Address xxx
CONTINUED ON NEXT PAGE
20
DESCRIPTION
Set DMX universe of each output.
Select the pixel bar model that
will be connected to each output.
• x = output port #
• xxx = pixel bar model
Select the number of pixel bar
units that will be connected to
each output.
• x = output port #
• xx = number of units
• xxx = pixel bar model
Set RGB Channel mode, see Pixel
Modes section of this manual for
details.
Set DMX start address
Select the output x.
Set the number of pixels (xxx)
that the output will control.
Set RGB Channel mode, see Pixel
Modes section of this manual for
details.
Set DMX start address
Select the output x.
Select the number of pixel wash
units that will be connected to
each output.
• x = output port #
• xx = number of units
Set RGB Channel mode, see Pixel
Modes section of this manual for
details.
Set DMX start address