Elation PIXEL DRIVER 4000 V3 User Manual page 12

INSTALLATION GUIDELINES
TRUSS MOUNTING
The device can be attached to truss or a like structure using an appropriated truss clamp (not
included) and an M10 screw (not included).
RIGGING
Overhead rigging requires extensive experience, including calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and
the device, among other requirements. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.
INSTALLATION LOCATION PLANNING
Use careful planning to select the installation location of the PIXEL DRIVER 4000 V3 unit(s).
The maximum distance from the driver to the first pixel bar should not exceed 50 feet (18m).
ALWAYS ATTACH A SAFETY
CABLE TO THE SAFETY CABLE
LOOP ON THE BACK OF THE
DEVICE WHENEVER INSTALLING
THIS DEVICE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE
FIXTURE WILL NOT DROP IF
12
SAFETY CABLE
THE CLAMP FAILS.