Autopilot Operation - Dometic Optimus EPS Installation And User Manual

The Title Bar will display
"Autopilot Mode" when the
autopilot is engaged.
3-10

3.4 Autopilot operation

In addition to seamless compatibility with the innovative Dometic SeaWays
autopilot and SeaStation virtual anchor, Optimus EPS is designed to interface
with several autopilot controllers. See the documentation with your autopilot
system for specific model compatibility and user instructions. If your boat is
equipped with SeaWays or SeaStation, refer to the instruction manual
(Book 67) for user instructions.
WARNING!
Read and understand the autopilot operation instructions before
engaging the autopilot mode. Do not leave the helm unattended while
the autopilot is engaged.
When autopilot is engaged:
• The CANtrak run screen will display a notification as shown in figure 3-8.
• The steering effort at the helm is increased to prevent inadvertent use.
This resistance may be user adjustable, depending on how the builder or
dealer set up your system. See section 3.3.5.
• Turning any steering wheel will override the autopilot and return control
to the helm. Steering resistance will return to normal until the autopilot
re-engages. See your autopilot user's manual for specific behavior
during an override.
Figure 3-8. Autopilot mode screen.
EN