Ring Tones - Siemens CF62 Operating Instructions Manual

36

Ring tones

Ring tones
K K
§Menu§
You can set the tones to match your
needs.
Ringer setting
Activate/deactivate the ring tone or
reduce it to a short beep.
Silent alert
Activate/deactivate silent alert (also
in addition to the ring tone). The si-
lent alert is activated if the highest
volume is set for the ring tone. This is
to remind you not to hold the phone to
your ear when ringing in order to avoid
damaging your hearing.
Volume
Set different volumes for types of
call/functions.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones.
Select function.
Set ring tones
K K
§Menu§
Here you can set the ring tone sepa-
rately for call types/functions. You
can download new ringtones from
the internet via
More tones...
Here you can set the ring tone sepa-
rately for the other functions.
Opening tone, Closing tone
Set signal to acknowledge opening/
closing the clamshell.
Call screening
Only calls from numbers that are in
the Addressbook/Phonebook or in a
predefined group are signalled. Oth-
er calls are only displayed. If you do
not accept these calls, they are di-
verted to your mailbox (if set,
page 43).
l
Screen display in standby
mode:
call screening is activated.
Key tones
Type of acoustic key tone:
or or
Click Tone
Minute beep
During a call, you will hear a beep
after each minute.
Information tones
Set service and alarm tones:
Select function.
Download new.
Silent