Siemens CF62 Operating Instructions Manual page 6

1
Loudspeaker
2
Colour Display
3
Soft keys
The current functions of these keys are shown
in the bottom line of the display as
§Text§/symbol (e.g.,
4
Input keys
*
5
Ringtone
• Hold down in standby mode:
Switch all audible signals on/off
(except alarm).
• Hold down on incoming call:
Switch off ring tone for this call only.
6
Plug socket
For charger, headset, camera etc.
7
Dynamic light
Seven LEDs indicate visually different events
and functions, as well as the current phone
status, e.g.network searching, battery low,
etc. (set, page 42).
You can determine the visual signal (LEDs)
on the phone for certain functions and events.
The LEDs then flash in different rhythms de-
pending on the current function.
Q
).
Phone overview
_ ª g
Service provider
01.05.2004 10:10
NewMMS Menu
5