Ring Tones; Ringer Setting; Silent Alert; Volume - Siemens CF62 User Manual

of CF62 Leopard us-en, A31008-H6050-A40-1-4A19 (24.02.2004, 16:32)
left page (63)

Ring tones

K
§Menu§
You can set the tones to your needs.

Ringer setting

On/Off
Beep
Additional information
*
Hold down in standby mode to
switch ringtone on/off.
k
Display: Beep.
j
Display: ringer off.

Silent alert

To avoid the disturbance caused by a
ringing phone, you can activate the
vibrating alert function as an alterna-
tive. The vibrating alert can also be
activated in addition to the ring tone
(e.g. in noisy environments). This
function is deactivated when the
battery is being charged or when the
phone is connected to the Car Kit.
The vibrating alert is activated if the
highest volume is set for the ring
tone. This is to remind you not to
hold the phone to your ear when the
phone is ringing in order to avoid dam-
aging your hearing.
K
Select function.
Activate/deactivate all
tones.
Reduce ring tone to a
short signal (beep).
Ring tones

Volume

Set different volumes for different
types of call/functions.
I
Select:
Calls
Messages
Alarms
Applications
E
Press. The ringtone is
played.
I
Set volume.
E
Confirm.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones.
If two independent phone numbers are
registered on your phone, you can set dif-
ferent volumes for them (page 84).
63