In-Codes; Security - Siemens CF62 Operating Instructions Manual

14

Security

Security
KmK
§Menu§
K
Select function
The phone and SIM card are protect-
ed against misuse by several security
codes.
Keep these confidential numbers in a
safe place where you can access them
again if required.
Codes
PIN control
You can stop the PIN prompt
being activated when the phone is
switched on, but you then risk unau-
thorised use of the phone.
Press.
§Change§
J
Enter PIN and confirm
with §OK§.
Change PIN
You can change the PIN to any 4- to
8-digit number you find easier to
remember.
J
Enter current PIN and
confirm with §OK§.
J
Enter new PIN.
§OK§
,
J
Renter new PIN.
§OK§
,
Security
Change PIN2
(Display only if PIN 2 is available).
Proceed as with
Change phonecode
You define the phone code (4-8 dig-
its) when you call up a protected
function for the first time. It is then
valid for all phone-code protected
functions.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Preventing accidental
activation
Even if PIN control is deactivated
confirmation is required to switch on
the phone.
This prevents the phone from being
switched on accidentally, e. g. when
carried in a pocket or whilst you are
on an aircraft.
B
Hold down and confirm
with §OK§. The phone
switches on.
Change PIN.