Victron energy MPPT 150/70 Manual page 73

Weight
Dimensions (h x w x d)
STANDARDS
Safety
1a) The solar charger will limit input power if more PV power is connected.
1b) The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher short circuit current may damage the solar charger in case of reverse polarity connection of the PV array.
3) Maximum current per MC4 connector is 30A.
4) Equalization is by default disabled.
5) For more information on data communication see the
our website. For VE.Can specifications see the
6) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels. The MC4 connectors are
internally parallel connected to a single MPPT tracker.
7) Note that below list of part numbers are 12/24V only. Not for 36/48V. And even if VictronConnect allows selecting 36 or
48V, they are still not to be sold or used as such. As per labels on the unit which indicate 12/24V only.
Model
SmartSolar 150/85-Tr VE.Can
SmartSolar 150/85-MC4 VE.Can
SmartSolar 150/100-Tr VE.Can
SmartSolar 150/100-MC4 VE.Can
Page 69
MPPT solar charger manual
150/70
3kg
Tr models: 185 x 250 x
95mm
MC4 models: 215 x 250 x
95mm
EN/IEC 62109-1, UL 1741, CSA C22.2
data communication paper
VE.Can ports [15]
Part number
SCC115085412
SCC115085512
SCC115110412
SCC115110512
7
150/85
4.5kg
Tr models: 216 x 295 x 103mm
MC4 models: 246 x 295 x 103mm
in the Technical information section
chapter.
7
150/100
on
Technical specifications