Page 3
Menüauswahlen von Software. < > weist auf Tasten der Tastatur Ihres Computers hin (wie etwa <RETURN>). TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 2 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 4
4.3.1 Ausführung mit ø 50H7 ................... 17 4.3.2 Ausführung mit ø 25H7…40H7 und optionaler Passfeder / Nut ......18 5 Zubehör ............................19 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 5
- Mechanische Kenndaten entfernt -> Verweis auf Produktdatenblätter 25.08.16 - Mitgeltende Dokumente Verallgemeinerung auf Baugröße 110 14.02.18 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 4 of 39 TR - ECE - BA - DGB - 0081 - 05 02/14/2018...
Page 6
Produktdatenblatt: www.tr-electronic.de/s/S014476 1.3 EU-Konformitätserklärung Die Mess-Systeme wurden unter Beachtung geltender europäischer bzw. internationaler Normen und Richtlinien entwickelt, konstruiert und gefertigt. Eine entsprechende Konformitätserklärung kann bei der Firma TR-Electronic GmbH angefordert werden. Hersteller Produkte, TR-Electronic GmbH D-78647 Trossingen, besitzt ein zertifiziertes Qualitätssicherungssystem gemäß ISO 9001.
Page 7
Elektrostatische Entladung (Electro Static Discharge) Internationale Elektrotechnische Kommission Verband der Elektrotechnik, Elektronik und Informationstechnik TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 6 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 8
Anzahl der Umdrehungen zusammen. Der erfasste Messwert wird ebenfalls verrechnet und je nach Schnittstelle über verschiedene Interface-Module ausgegeben. Prinzip Abbildung 1: Mess-System-Funktionsweise TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 9
Anlage/Maschine in die das Mess-System eingebaut werden soll, den Bestimmungen der EU-EMV-Richtlinie, den harmonisierten Normen, Europanormen oder den entsprechenden nationalen Normen entspricht. TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 8 of 39...
Page 10
Insbesondere ist folgende Verwendung untersagt: In Umgebungen mit explosiver Atmosphäre zu medizinischen Zwecken TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 11
Reparaturen dürfen nur vom Hersteller, oder einer vom Hersteller autorisierten Stelle bzw. Person vorgenommen werden. TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 10 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 12
Muss nach der Lebensdauer des Gerätes eine Entsorgung vorgenommen werden, sind die jeweils geltenden landesspezifischen Vorschriften zu beachten. TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 13
Unsachgemäßes Verpackungsmaterial kann beim Transport Schäden am Gerät verursachen. Lagerung Lagertemperatur: siehe Produktdatenblatt Trocken lagern TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 12 of 39 TR - ECE - BA - DGB - 0081 - 05 02/14/2018...
Page 14
Madenschrauben am Wellenansatz mittels Inbus-Schlüssel festgezogen werden. ø Abbildung 3: Ausführung mit Pass-Stift in eingebautem Zustand bei 50H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 15
ø Abbildung 5: Ausführung mit Pass-Stift und Nuteinsatz in eingebautem Zustand bei 25H7…40H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 14 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 16
Madenschrauben am Wellenansatz mittels Inbus-Schlüssel festgezogen werden. Abbildung 7: Ausführung mit Pass-Stift und Feder-Drehmomentstütze in eingebautem Zustand ø 50H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 17
Abbildung 9: Ausführung mit Pass-Stift und Feder-Drehmomentstütze in eingebautem Zustand bei ø 25H7…40H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 16 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 18
Schlüssels festgezogen werden. ø Abbildung 10: Ausführung mit Drehmomentstütze (Federblech) bei 50H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05 Page 17 of 39...
Page 19
Klemmring mit Hilfe eines Inbus-Schlüssels festgezogen wird. ø Abbildung 11: Ausführung mit Drehmomentstütze (Federblech) bei 25H7…40H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 18 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 20
5 Zubehör www.tr-electronic.de/produkte/drehgeber/zubehoer.html TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05 Page 19 of 39...
Page 21
Zubehör TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 20 of 39 TR - ECE - BA - DGB - 0081 - 05 02/14/2018...
Page 22
_Intended use Assembly Instructions _General functional description _Instructions for mounting TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05 Page 21 of 39...
Page 23
< > indicates keys on your computer keyboard (such as <RETURN>). TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 22 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 24
4.3.1 Type with ø 50H7 ....................37 4.3.2 Type with ø 25H7…40H7 and optional parallel key / groove ......... 38 5 Accessories ............................. 39 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 25
08/25/16 - Other applicable documents Generalization to construction size 110 02/14/18 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 24 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 26
1.3 EC Declaration of conformity The measuring systems have been developed, designed and manufactured under observation of the applicable international and European standards and directives. A corresponding declaration of conformity can be requested from TR-Electronic GmbH. The manufacturer of the product, TR-Electronic GmbH in D-78647 Trossingen, operates a certified quality assurance system in accordance with ISO 9001.
Page 27
Electro Static Discharge International Electrotechnical Commission Association for Electrical, Electronic & Information Technologies TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 26 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 28
Principle Figure 1: Measuring system operating principle TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 29
EU EMC Directive, the harmonized standards, European standards or the corresponding national standards. TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 28 of 39...
Page 30
The following area of use is especially forbidden: In environments where there is an explosive atmosphere for medical purposes TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 31
Repairs may only be undertaken by the manufacturer or a facility or person authorized by the manufacturer. TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 30 of 39...
Page 32
Disposal If disposal has to be undertaken after the life span of the device, the respective applicable country-specific regulations are to be observed. TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 33
Storage Storage temperature: see product data sheet Store in a dry place TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 32 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 34
ø Figure 3: Type with dowel pin in assembled condition with 50H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 35
ø Figure 5: Type with dowel pin and groove application in assembled condition with 25H7…40H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 34 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 36
ø Figure 7: Type with dowel pin and spring torque holder in assembled condition with 50H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 37
ø Figure 9: Type with dowel pin and spring torque holder in assembled condition with 25H7…40H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 36 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 38
ø Figure 10: Type with torque holder (sheet-metal spring) with 50H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05...
Page 39
ø Figure 11: Type with torque holder (sheet-metal spring) with 25H7…40H7 TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany Page 38 of 39 TR - ECE - BA - DGB - 0081 - 05...
Page 40
5 Accessories www.tr-electronic.com/products/rotary-encoders/accessories.html TR-Electronic GmbH 2011, All Rights Reserved Printed in the Federal Republic of Germany 02/14/2018 TR - ECE - BA - DGB - 0081 - 05 Page 39 of 39...
Page 42
Menüauswahlen von Software. ″ < > ″ weist auf Tasten der Tastatur Ihres Computers hin (wie etwa <RETURN>). TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 2 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 43
5.2.3 Ausgabecode ......................27 5.2.4 Negative Werte ....................... 27 5.3 Endschalter ..........................28 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 3 of 107...
7.2.3 Ausgabecode ......................39 7.3 Istwerte ........................... 39 7.3.1 Position ........................39 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 4 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 45
8.4.2 Geschwindigkeit in Umdr/Min ................. 52 9 Fehlerursachen und Abhilfen ......................53 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 5 of 107...
Page 46
19.06.17 - Kapitel „Anschluss – Hinweise“ bearbeitet EX-Passus „neutral“ 30.07.20 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 6 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
Page 47
Außendurchmesser ∅ 110 mm Singleturn Multiturn Fortlaufende Nummer * = Platzhalter Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 7 of 107...
Page 48
National Electrical Code Periodendauer SSI Monozeit Pausenzeit Verzögerungszeit Vorzeichen Hexadezimale Darstellung TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 8 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
Page 49
Dies gilt in besonderem Maße für nur gelegentlich, z. B. bei der Parametrierung des Mess-Systems, tätig werdendes Personal. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Page 50
Der gefahrlose Einsatz erfordert zusätzliche Maßnahmen bzw. Anforderungen. Diese sind vor der Erstinbetriebnahme zu erfassen und müssen entsprechend umgesetzt werden. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 10 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 51
Von Nachteil ist aber die stark erhöhte Übertragungsdauer. Abbildung 1: SSI Prinzip-Eingangsschaltung Abbildung 2: SSI-Ausgangsschaltung Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 11 of 107...
Page 52
● Es wird empfohlen, nach Abschluss der Montagearbeiten eine visuelle Abnahme mit Protokoll zu erstellen. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 12 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 53
Ausgängen zur Verfügung, die Empfängerbausteine erkennen Pegel von ± 200 mV noch als gültiges Signal. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Page 54
Die Steckerbelegungsnummer ist auf dem Typenschild des Mess-Systems vermerkt. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 14 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 55
Für den Betrieb ab Windows 7 wird der USB PC-Adapter HID (V5), Art-Nr.: 490-00313 mit Installationsanleitung TR-E-TI-DGB-0103 benötigt. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 15 of 107...
Page 56
Takt+ High Daten+ High intern re-triggerbares Monoflop Abbildung 4: SSI-Übertragungsformat TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 16 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
Page 57
Der ausgegebene Positionswert wird mit einer Nullpunktskorrektur, der eingestellten Zählrichtung und den eingegebenen Getriebeparametern verrechnet. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Page 58
Anzahl Umdrehungen Zähler Messlänge in Schritten = Anzahl Schritte pro Umdrehung * Anzahl Umdrehungen Nenner TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 18 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 59
Den mechanisch zurückgelegten Weg in mm vermessen Istposition des Mess-Systems an der angeschlossenen Steuerung ablesen Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Page 60
= 1348,073499 Schritte / Umdr. * 1 Umdrehung Nenner = 5521709 Schritte (abgerundet) TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 20 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 61
–1 073 741 824 Obergrenze 1 073 741 824 Default Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 21 of 107...
Page 62
Programmierte Anzahl Datenbits = 22 1 – 22 – P 2 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 22 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 63
S1 S2 S3 S4 S5 S6 S7 Anzahl Umdrehungen Schrittzahl pro Umdrehung Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 23 of 107...
Page 64
Wegen der hohen Störsicherheit bei diesem Übertragungsformat, wird diese Technik z.B. in elektrisch stark „verseuchter“ Umgebung mit langen Verbindungswegen eingesetzt. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 24 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 65
SSI-Sonderbits auf „ständig 0V“ programmiert und erzeugen, wenn sie zum Tragen kommen, bis zum 26. Takt nachlaufende „Nullen“. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Page 66
– P 2 S1 S2 S3 S4 Datenwort 1 Datenwort 2 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 26 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 67
0x9999 0x8001 0xFFFE 0x8002 0x9998 0x8002 0xFFFD 0x8003 0x9997 0x8003 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 27 of 107...
Bewegung oder Richtungsänderung gemeldet wird. Die Hysterese gilt auch für die nachfolgend geschilderten Signale Aufwärts gegangen und Bewegung. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 28 of 107...
Im Fehlerfall wird es invertiert. Dadurch wird die zusätzliche Übertragung eines Encoderfehlers eingespart. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
5.5.2 Umdr/Min Im Onlinezustand wird im Feld Umdr/Min die aktuelle Mess-System-Drehzahl in min angezeigt. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 30 of 107 TR - ECE - BA - DGB - 0039 - 14...
Legt die Anzahl der Umdrehungen fest, bevor das Mess-System wieder bei null beginnt. Untergrenze Obergrenze 4096 Default 4096 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 31 of 107...
Auswahl Beschreibung Default freigegeben Preset-Justage-Funktion aktiv kundenspezifisch gesperrt Preset-Justage-Funktion inaktiv TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 32 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
Parity-Sonderbit folgt immer nach dem letzten Datenbit der Positionsausgabe. Es wird aus allen vorausgehenden Bits berechnet. Daher ist auch nur ein einziges Parity- Sonderbit möglich. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 34 of 107...
Zur Berechnung können die Parameter Schritte/Umdr. und Anzahl Umdrehungen vom Typenschild des Mess-Systems abgelesen werden. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Auswahl Beschreibung Default freigegeben Preset-Justage-Funktion aktiv kundenspezifisch gesperrt Preset-Justage-Funktion inaktiv TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 36 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
Programmierte Anzahl Datenbits = 22 1 – 22 – P 2 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 37 of 107...
– P 2 – P 2 Anzahl Umdrehungen Schrittzahl pro Umdrehung TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 38 of 107 TR - ECE - BA - DGB - 0039 - 14...
Funktion Daten zum Gerät schreiben übernommen. gewünschter Positionswert < prog. Messlänge in Schritten Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 39 of 107...
Umdrehungen Zähler/Umdrehungen Nenner eine Kommazahl sein darf. Der ausgegebene Positionswert wird mit einer Nullpunktskorrektur, der eingestellten Zählrichtung und den eingegebenen Getriebeparametern verrechnet. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 40 of 107...
Messlänge in Schritten = Anzahl Schritte pro Umdrehung * Anzahl Umdrehungen Nenner Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 41 of 107...
Page 82
Zu erfassende Mechanik in Endlage bringen Den mechanisch zurückgelegten Weg in mm vermessen Istposition des Mess-Systems an der angeschlossenen Steuerung ablesen TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 42 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 83
= 1348,073499 Schritte / Umdr. * 1 Umdrehung Nenner = 5521709 Schritte (abgerundet) Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 43 of 107...
Preset-Justage-Funktion inaktiv 8.1.5 Messwertanfang Keine Funktion, wird intern auf „0“ gesetzt. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 44 of 107 TR - ECE - BA - DGB - 0039 - 14...
Programmierte Anzahl Datenbits = 22 1 – 22 – P 2 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 45 of 107...
Datenbit der Positionsausgabe angehängt. Nach jeder fehlerfreien SSI- Übertragungssequenz wird der momentane Zustand des Toggelbits geändert. Im Fehlerfall wird der letzte Zustand des Toggelbits vor dem Fehler beibehalten. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 46 of 107...
– P 2 – P 2 Datenwort 1 Datenwort 2 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 47 of 107...
Wegen der hohen Störsicherheit bei diesem Übertragungsformat, wird diese Technik z.B. in elektrisch stark „verseuchter“ Umgebung mit langen Verbindungswegen eingesetzt. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 48 of 107 TR - ECE - BA - DGB - 0039 - 14...
Beschreibung Default Binär SSI-Ausgabecode = Binär Gray SSI-Ausgabecode = Gray Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 49 of 107...
Drehrichtung im Uhrzeigersinn, K1 nacheilend mit Blick auf die Anflanschung TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 50 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
Blick auf die Anflanschung K1 = 0, K2 = 0 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 51 of 107...
Im Onlinezustand wird im Feld Geschwindigkeit in Umdr/Min die aktuelle Mess-System-Drehzahl in min angezeigt. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 52 of 107 TR - ECE - BA - DGB - 0039 - 14...
Lässt sich der Fehler auch nicht durch mehrmaliges Speicherfehler Quittieren zurücksetzen, muss das Mess-System getauscht werden. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 53 of 107...
Page 94
Fehlerursachen und Abhilfen TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 54 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
Page 95
User Manual C_ _ -58/80/110 SSI Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 55 of 107...
Page 96
″ < > ″ indicates keys on your computer keyboard (such as <RETURN>). TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 56 of 107 TR - ECE - BA - DGB - 0039 - 14...
5.2.3 Transmit code ......................81 5.2.4 Negative values ...................... 81 5.3 Cams ............................82 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 57 of 107...
Page 98
7.2.3 Transmit code ......................93 7.3 Position value.......................... 93 7.3.1 Position ........................93 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 58 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 99
8.4.2 Speed 1/min......................106 9 Causes of faults and remedies ...................... 107 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 59 of 107...
06/19/17 - Chapter “Connection – notes” edited EX passage “neutral” 07/30/20 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 60 of 107 TR - ECE - BA - DGB - 0039 - 14...
Single turn Multi turn Consecutive number * = Wild cards Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 61 of 107...
SSI mono time Pause time Delay time Sign Hexadecimal notation TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 62 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
This particularly applies for personnel who are only deployed occasionally, e.g. at the parameterization of the measurement system. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Fail-safe usage requires additional measures and requirements. Such measures and requirements must be determined prior to initial commissioning and must be taken and met accordingly. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 64 of 107...
● Upon completion of installation, a visual inspection with report should be carried out. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 66 of 107 TR - ECE - BA - DGB - 0039 - 14...
Under load RS422 transmitters provide output levels of ±2 V between the two outputs. RS422 receivers still recognize levels of ±200 mV as valid signal. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
„www.tr-electronic.com/service/downloads/pin-assignments.html”. The number of the pin assignment is noted on the nameplate of the measuring system. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 68 of 107...
For operation ex Windows 7 the USB PC adapter HID (V5), order no.: 490-00313 with installation guide TR-E-TI-DGB-0103 must be used. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 69 of 107...
High internal Monoflop, can be retriggered Figure 4: SSI transmission format TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 70 of 107 TR - ECE - BA - DGB - 0039 - 14...
The position value output is calculated with a zero point correction, the count direction set and the gearbox parameter entered. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Number of revolutions numerator Total number of steps = Number of steps per revolution * Number of revolutions denominator TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 72 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 113
Read off the actual value of the measuring system from the controller connected Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 73 of 107...
Page 114
= 1348.073499 steps / rev. * 1 revolution denominator = 5521709 steps (rounded off) TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 74 of 107 TR - ECE - BA - DGB - 0039 - 14...
Programmed number of data bits = 22 1 – 22 – P 2 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 76 of 107 TR - ECE - BA - DGB - 0039 - 14...
S1 S2 S3 S4 S5 S6 S7 Number of revolutions Number of steps per revolution Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 77 of 107...
Because of high immunity to disturbance with this transmission format, this technology is used e.g. in areas with strong electro smog and long connection lines. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 78 of 107...
"Logical 0V" and produce, if they can be output, added "zeros" up to the 26. clock. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Page 120
– P 2 S1 S2 S3 S4 Data word 1 Data word 2 TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 80 of 107 TR - ECE - BA - DGB - 0039 - 14...
0x9999 0x8001 0xFFFE 0x8002 0x9998 0x8002 0xFFFD 0x8003 0x9997 0x8003 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 81 of 107...
The hysteresis also applies to the UP and Moving signals explained below: TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 82 of 107...
In the case of an error, it is inverted. Its purpose is to make additional transmitting of the encoder error unnecessary. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
5.5.2 Speed 1/min. In the online state in the field Speed 1/min. the current measuring system speed in is displayed. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 84 of 107 TR - ECE - BA - DGB - 0039 - 14...
4096 default 4096 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 85 of 107...
Preset adjustment function active user-specific disabled Preset adjustment function inactive TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 86 of 107 TR - ECE - BA - DGB - 0039 - 14 07/30/2020...
20 μs upper limit 50 μs default 20 μs Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 87 of 107...
It is calculated from all previous bits. About that, only one single Parity special bit is possible. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 88 of 107...
To calculate, the parameters Number of steps per revolution and the Number of revolutions can be read on the measuring system nameplate. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Preset adjustment function active user-specific Not in use Preset adjustment function inactive TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 90 of 107 TR - ECE - BA - DGB - 0039 - 14...
Programmed number of data bits = 22 1 – 22 – P 2 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 91 of 107...
– P 2 Number of revolutions Number of steps per revolution TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 92 of 107 TR - ECE - BA - DGB - 0039 - 14...
< programmed Total number of steps Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
/ Revolutions denominator can be a decimal number. The position value output is calculated with a zero point correction, the count direction set and the gearbox parameter entered. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 94 of 107...
Total number of steps = Number of steps per revolution * Number of revolutions denominator Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14...
Page 136
Measure the mechanical distance covered in mm Read off the actual value of the measuring system from the controller connected TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 96 of 107 TR - ECE - BA - DGB - 0039 - 14...
Page 137
= 1348.073499 steps / rev. * 1 revolution denominator = 5521709 steps (rounded off) Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 97 of 107...
Preset adjustment function inactive 8.1.5 Origin Type Not supported, internally set to “0”. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 98 of 107 TR - ECE - BA - DGB - 0039 - 14...
Programmed number of data bits = 22 1 – 22 – P 2 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 99 of 107...
Toggle bit is changed. In the event of an error the last condition of the Toggle bit, before the error was occurred, is maintained. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany...
– P 2 – P 2 Data word 1 Data word 2 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 101 of 107...
Because of high immunity to disturbance with this transmission format, this technology is used e.g. in areas with strong electro smog and long connection lines. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 102 of 107...
K1 after K2 clockwise, with view onto the flange side TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 104 of 107 TR - ECE - BA - DGB - 0039 - 14...
K1 = 0, K2 = 0 Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 105 of 107...
8.4.2 Speed 1/min. In the online state in the field Speed 1/min. the current measuring system speed in is displayed. TR-Electronic GmbH 2005, All Rights Reserved Printed in the Federal Republic of Germany Page 106 of 107 TR - ECE - BA - DGB - 0039 - 14...
If the error cannot be reset, the measuring system must be Memory error replaced. Printed in the Federal Republic of Germany TR-Electronic GmbH 2005, All Rights Reserved 07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 107 of 107...
Page 148
Elektro- und Elektronikgeräten (RoHS) 2011/65/EU (L 174/88) Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) in alleiniger Verantwortung von / under the sole responsibility of: TR-Electronic GmbH Eglishalde 6 D - 78647 Trossingen Tel.: 07425/228-0...
Page 149
Gültigkeitsliste / List of validity Baugröße / Size: 20 Order No.: 240-xxxxx Type: IH20 Baugröße / Size: 22 Order No.: CMV22x-xxxxx, CMV22x-xxxxx, 0000-xxxxx, 0002-xxxxx Type: CMV22, CMW22 Baugröße / Size: 24 Order No.: 209-xxxxx Type: IEV24, IES24 Baugröße / Size: 36 Order No.: Cxx36x-xxxxx, 0000-xxxxx Type: CEV36, CES36, COV36, COS36, CDV36, CDF36, CMV36, CMS36, CMF36...
Page 152
Baugröße / Size: 80, 81 Order No.: CEH80x-xxxxx, COH80x-xxxxx Type: CEH80, COH80 Order No.: CES80x-xxxxx, COS80x-xxxxx Type: CES80, COS80 Order No.: CEH802x-xxxxx, COH802x-xxxxx Type: CEH802, COH802 Order No.: CES802x-xxxxx, COS802x-xxxxx Type: CES802, COS802 Order No.: IEH80-xxxxx Type: IEH80 Order No.: 260-xxxxx, 261-xxxxx Type: ZH80, ZH81 Order No.: Qxx8xx-xxxxx...
Page 153
Order No.: CEx100x-xxxxx Type: CEV100, CES100, CEH100 Order No.: 201-xxxxx, 202-xxxxx Type: HE100 Order No.: HEx100x-xxxxx Type: HEV100, HES100, HEH100 Order No.: 172-xxxxx, 173-xxxxx Type: ZE100, ZE115 Order No.: 235-xxxxx Type: IE100, IE101 Order No.: IEx100-xxxxx Type: IEV100, IES100, IEH100 Baugröße / Size: 110 Order No.: CEH110x-xxxxx, COH110x-xxxxx Type:...
Page 154
The Restriction of the Use of Certain Hazardous Substances in S.I. 2012 No. 3032 Electrical and Electronic Equipment Regulations 2012 under the sole responsibility of the manufacturer: Name and address of authorised representative: TR-Electronic GmbH TR-Electronic Ltd. Eglishalde 6 4 William House D - 78647 Trossingen Old St.
Page 155
List of validity Size: 20 Order No.: 240-xxxxx Type: IH20 Size: 22 Order No.: CMV22x-xxxxx, CMV22x-xxxxx, 0000-xxxxx, 0002-xxxxx Type: CMV22, CMW22 Size: 24 Order No.: 209-xxxxx Type: IEV24, IES24 Size: 36 Order No.: Cxx36x-xxxxx, 0000-xxxxx Type: CEV36, CES36, COV36, COS36, CDV36, CDF36, CMV36, CMS36, CMF36 Order No.: Ixx36x-xxxxx Type: IMV36, IMS36, IMF36...
Page 162
525E-6 kg m² Anlaufdrehmoment, 20 °C 8 Ncm Rundlauftoleranz ± 0,05 mm Masse, typisch - Ohne Welleneinsatz 1,200 kg - Mit Welleneinsatz 1,750 kg Änderungen vorbehalten. TR-Electronic GmbH Eglishalde 6 78647 Trossingen Tel. +49 (0) 7425 228-0 Seite 3/4 info@tr-electronic.de www.tr-electronic.de...
Page 163
Arbeitstemperatur - Standard 0…+60 °C - Optional -20…+70 °C; Lagertemperatur, trocken -30…+80 °C Relative Luftfeuchte 98 %, keine Betauung Schutzart - Standard IP54 Änderungen vorbehalten. TR-Electronic GmbH Eglishalde 6 78647 Trossingen Tel. +49 (0) 7425 228-0 Seite 4/4 info@tr-electronic.de www.tr-electronic.de...
Need help?
Do you have a question about the 110 Series and is the answer not in the manual?
Questions and answers