ICON PRO-FORM PERFORMANCE 600i User Manual page 12

10. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4"
Bolt (3) from the bracket on the Latch Crossbar
(38).
Align the upper end of the Storage Latch (53)
with the bracket on the Latch Crossbar (38),
and insert the 5/16" x 2 1/4" Bolt (3) through the
bracket and the Storage Latch. This will push
a spacer (I) out of the Storage Latch; discard
the spacer.
Next, tighten the 5/16" Nut (12) onto the 5/16" x
2 1/4" Bolt (3). Do not overtighten the Nut; the
Storage Latch (53) must be able to pivot.
Then, lower the Frame (56) (see HOW TO
LOWER THE TREADMILL FOR USE on page
24).
11. Set the console assembly (J) on the Left and
Right Handrails (86, 87). Make sure not to
pinch any wires (K, 81).
Attach the console assembly (J) with four 5/16"
x 1/2" Screws (4) and four 5/16" Star Washers
(11); do not tighten the Screws yet.
10
12 I
38
56
11
K
87
11
81
4
12
3
53
J
86
11
4