Settings/Supervisor level menu
44
2. Program creation menu
You can choose the program's features by changing the
basic settings.
Enter the names of your special programs and their basic
settings into the "Special programs" table in the "Program
chart".
EXTRA+
Temperature
– The temperature can be selected in 5°C steps from cold to
95°C.
Spin speed
– The spin speed is selected in steps of 100 from Without
spin to 1100 rpm.
Wash block
– One or more wash blocks can be selected.
^ To save the special program, select "Confirm selection" at
the end of the list.
^ Select Back. The program will now appear in the Program
selection menu.
Back A
Temperature
Spin speed
Wash block