Supero SUPERSERVER 2027TR-HTRF+ User Manual page 69

Notes:
1. For the latest CPU/Memory updates, please refer to our website at
www.supermicro.com/products/serverboard/ for details.
2. Use only the correct type of onboard CMOS battery as specifi ed by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
3. Jumpers not indicated are for test purposes only.
4. All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The serverboard you've
received may or may not look exactly the same as the graphics shown in this
manual.
Jumper Description
JBT1 Clear CMOS
JPB1 BMC Enable/Disable
JPG1 VGA Enable/Disable
JPL1 Ethernet GLAN1/GLAN2 Enable/Diable
JWD1 Watch Dog
LED Description
LE1 Onboard PWR LED
LE2 UID LED
LE3 HDD LED
LEM1 BMC Heartbeat LED
Chapter 5: Advanced Serverboard Setup
X9DRT-HF+ Quick Reference
State
On
Blue: On (Windows OS
Blinking (Linux)
Green: On
Green: Blinking
5-15
Default Setting
See Section 5-9
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Status
Onboard PWR On
Unit Identifi ed
HDD/SATA Active
BMC Normal
http://