Before First Use - Electrolux EVY9847AAX Owner's Manual

10 www.electrolux.com

5. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 First Connection
When you connect the appliance to the
mains or after the power cut, you have to
Water hardness
Class
1
2
3
4
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the four colour change strip
supplied with the steam set in the
oven.
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water!
3. Shake the strip to remove the excess
of the water.
4. After 1 minute check the hardness of
the water according to the table
below.
The colours of the reaction zones
continue to change after 1 minute.
Calcium deposit
(mmol/l)
dH
0 - 7 0 - 1.3
7 - 14 1.3 - 2.5
14 - 21 2.5 - 3.8
over 21 over 3.8
set the language, the display contrast,
the display brightness and the time of the
day.
1. Press or
2. Press to confirm.
5.3 Setting the hardness level
for the water
When you connect the appliance to the
mains, you have to set the water
hardness level.
The table below explains the water
hardness range with the corresponding
Calcium deposit (mmol/l) and the quality
of the water.
Calcium deposit
(mg/l)
0 - 50
50 - 100
100 - 150
over 150
Do not consider this in the
measurement.
5. Set the hardness of the water in the
menu: Basic Settings.
Test strip
to set the value.
Water clas‐
sification
Soft
Moderately
hard
Hard
Very hard
Hardness of the
water
1
2
3