Configuring A Connection For Fiery Spooler - Sharp AR-C360P Software Installation Manual

2
2-87 Installing Fiery software and fonts
To configure the connection for Fiery Spooler
1. Start the utility by double-clicking its icon.
2. Click Option.
3. Click Add.
4. Enter the appropriate information for the Sharp AR-C360P.
5. When you have entered all the information, click Add.
6. With the device name selected, click OK.
Fiery name and device
name (Sharp AR-C360P)
7. Click OK in the Configure dialog box.
Sharp AR-C360P EFI User's Software Installation Guide - 87

Configuring a connection for Fiery Spooler

Before you begin, print a Configuration page from the Printer
Control Panel and note the IP address of the Sharp AR-C360P. See
page 2-84.
The Chooser dialog box appears.
—Enter the IP address (or DNS name) of the Sharp AR-
Name
C360P.
—Enter the name of the device that the Fiery is
New Device
installed in: Sharp AR-C360P. This device name appears in the
Printer Setup section of the Configuration page.
Type Sharp AR-C360P exactly as shown because the device
Note:
name is case-sensitive.
The Sharp AR-C360P appears in a list of configured servers.