Sharp AR-C360P Software Installation Manual page 26

1
1-26 Installing User Software on a Windows Computer
8. Select "Display a list of all the drivers in a specific location, so you can
select the driver you want," and then click Next.
9. Select "Show all hardware."
10. From the Manufacturers list, select "(Standard port types)." From the
Models list, select "ECP Printer Port" (not Printer Port). Click Next.
11. Click Yes in the Update Driver Warning dialog box.
12. Click Next.
13. Click Finish, then close the Printer Port Properties and System Properties
dialog boxes.
You must restart your computer to activate the new settings. After
Windows 98/Me restarts, complete the procedure described in
prepare the printer for parallel port printing"
Completing the Windows 98/Me IPX/SPX or IPX (Novell)
connection
If you are printing through a Novell server, the Novell network and
file server should be set up before you begin. The file server
should be configured with a print server and print connection for
the Sharp AR-C360P. For details, see your NetWare
documentation and Chapter 2 of the Configuration Guide.
Sharp AR-C360P EFI User's Software Installation Guide - 26
"To
on page 1-22.