Sharp AR-C360P Software Installation Manual page 38

1
1-38 Installing User Software on a Windows Computer
• Configure a port on each Windows NT 4.0 computer for the
network type.
Configure the parallel
connection
Configure the TCP/IP (LPR port)
connection
Configure the IPX (Novell)
connection
Completing the Windows NT 4.0 parallel port connection
The parallel port cable connects the Fiery to a single computer.
Once you have installed the Windows NT 4.0 PostScript printer
driver and the Fiery printer description files, complete the setup
for parallel port printing.
To set up parallel printing for Windows NT 4.0
1. Click Start, choose Settings, and then choose Printers.
2. Double-click the Fiery icon and choose Properties from the Printer menu.
In the Ports tab, confirm that LPT1 (Local Port) is checked.
The Fiery is ready to accept parallel print jobs from your
computer, using the Windows NT 4.0 PostScript printer driver and
the Fiery printer description file.
3. Click the General tab and click Print Test Page.
4. To share the printer on the network, click the Sharing tab.
Select whether to share the printer, and specify the operating
systems used by
network clients.
Sharp AR-C360P EFI User's Software Installation Guide - 38
To do this See
Required for printing locally via
parallel port. See "Completing the
Windows NT 4.0 parallel port
connection" in this section.
Done automatically during driver
installation from CD.
Required for printing via a NetWare
server. See "Completing the
Windows NT 4.0 IPX (Novell)
connection" on page 1-39.