Sharp AR-C360P Software Installation Manual page 48

1
1-48 Installing User Software on a Windows Computer
settings automatically
If you have a TCP/IP-enabled network, you can automatically
update your printer driver to reflect the options currently installed
on the Fiery. When the printer driver is first installed, the
installable options have default settings that were set up in
Fiery Setup or ColorWise Pro Tools. When you update the printer
driver with the Two-Way Communication feature, you allow the
Fiery to complete the actual setting.
The Two-Way Communication feature also updates Expert Color
Settings options to reflect the current Color settings on the Fiery.
To access the Expert Color Settings options, click the Expert
Settings tab in the ColorWise print option bar of the Fiery printing
tab of your printer driver. For more information, see Chapter 1 of
the
Color Guide.
To set up Two-Way Communication for PostScript
or PCL printer drivers for Windows
2000/XP/Server 2003
1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-
Way Communication.
2. Type the Sharp AR-C360P's IP address or DNS name.
3. In the PS driver, to display the Sharp AR-C360P's current default settings
when opened, select Update Fiery Driver When Opened.
4. Click Update.
5. In the PS driver, to receive an e-mail notification after your job has been
printed, select Enable E-mail Notification, and type in the e-mail address
to which notification should be sent.
You will also receive e-mail notification of any errors that occur
during printing.
Note:
is enabled at Setup.
Sharp AR-C360P EFI User's Software Installation Guide - 48
Enable E-mail Notification is displayed only if Email Service