Sharp AR-C360P Software Installation Manual page 63

1
1-63 Installing EFI Fiery Mail Port
Fiery's E-mail Address
C360P.
Outgoing Mail Server
server for the port monitor to use.
7. Click Advanced.
The E-Mail Port Configuration dialog box appears.
8. Enter the following information.
For Fiery Server:
E-mail Address
Queue
For Outgoing Mail Server (SMTP):
Server Name
From Address
For Options:
Break apart messages larger than
e-mail message is displayed. If a job exceeds this size, it is split
into multiple messages, each not exceeding this size.
Status messages from Fiery
requests the Fiery to send status reports of the job via e-mail.
Sharp AR-C360P EFI User's Software Installation Guide - 63
—Enter the e-mail address of the Sharp AR-
—Enter the name or IP address of the SMTP
—The e-mail address of the Fiery.
—The print connection on the Fiery that you want.
—The SMTP server to use.
—The "from" address to insert in the e-mail.
—The maximum size of a single
—When enabled, the Status option