ALLIANCE TR5003WN User Manual page 13

To reduce the risk of serious injury, do not by-
pass the lid switch or lid lock to permit the wash-
er to agitate or spin with the lid open.
5. Set the WASH TEMPERATURE control. (All rinses are cold.)
6. Set the LOAD SIZE (water level) control, AUTO FILL, or AUTO
FILL/EXTRA RINSE.
7. Select HEAVY SOIL if desired.
8. Select the cycle according to the type of fabric being wash-
ed. Refer to Determine Proper Cycle. If the selected cycle is
not the correct cycle for the fabric being washed, you may
change the cycle selection at any time until the first wash
fill is complete.
IMPORTANT: Once the first wash fill is complete,
changing the Cycle Selection knob will have no ef-
fect.
NOTE: The Normal Eco cycle is recommended for
everyday cottons and linens.
9. Press the START/PAUSE button to begin the cycle. The lid
will stay unlocked during the first fill so you can easily add
items. The lid will lock automatically after the initial wet-
down fill and before agitation begins.
NOTE: Lid must be closed for fill, agitation and spin
to start.
During the first fill when the Auto Fill Load Size is selected, wa-
ter fills to the minimum level programmed for the specific cycle
selected. Once the wash step begins, the control starts sens-
ing the load. Once sensing is complete more water may be
added to optimize wash results.
The washer will stop (pause) shortly before the wash and rinse
spins. This is a normal part of the cycle.
The lid will automatically unlock at the end of the cycle after a
short pause to ensure there is no washtub movement.
Pausing the Cycle
The lid will stay unlocked during the first wash fill so you can
add items. Lifting the lid during this time will pause the cycle.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
TLW2324N_SVG
WARNING
You must press the Start/Pause button once the lid is closed
to resume the cycle.
You can also pause the cycle after the first fill to unlock the lid.
However the cycle selection can't be changed at this time.
NOTE: You can't pause a cycle right after starting it.
There is a short delay while the machine is energizing.
1. To pause a running cycle, press the Start/Pause button
once. The current Status light will go out.
2. The lid will unlock after about 10 seconds if the cycle is in
agitate or up to 60 seconds if the cycle is in spin.
3. The LID LOCK Status light will flash to indicate the cycle is
paused.
4. Press the Start/Pause button again to resume the cycle. It
will start from the place it was in the cycle when paused.
You can't change the cycle selection while it is paused.
The Auto Fill sensing stage will begin again after the cycle has
W939 been restarted. If you pause the cycle to add an item, once the
cycle resumes it will sense if more water needs to be added or
not.
Canceling the Cycle
You can change the cycle during the first wash fill. If you need
to change the cycle after that you must cancel it first.
1. To cancel a cycle, hold the Start/Pause button for three
seconds.
2. The lid will unlock after about 10 seconds if the cycle is in
agitate or up to 60 seconds if the cycle is in spin.
3. The LID LOCK Status light will go out.
4. You can now change the cycle type, if desired. For example,
you may want to change it from HEAVY DUTY to DELICATE
depending on the type of clothes being washed.
5. Press the Start/Pause button to start the new cycle.
NOTE: If you change the cycle and press Start/Pause
before the lid unlocks, the new cycle will begin after
the motor has stopped.
13
Operating Your Washer
Part No. 205052ENR1