Using External Floppy Disk Drive Unit - Sharp PC-AX Series Manual

Using External Floppy Disk Drive Unit

You can use double-density (2DD) 720KB or high-density (2HD) 1.44MB floppy
disks with the external floppy disk drive unit.
2
Connecting External Floppy Disk Drive Unit
• Do not place the floppy disk drive unit on its side or upside down.
• Do not press on the floppy disk drive unit. It may damage the drive or
cause malfunction.
• Do not place the AC adapter on the floppy disk drive unit. It may cause
the drive to malfunction.
• Do not connect/disconnect the floppy disk drive in MS-DOS mode.
1. Connect the floppy disk drive unit cable into the unit.
2. Connect the core side connector of the floppy disk drive unit cable to any one
of the mini USB ports on the left side of the computer. Be sure to let the arrow
side down when connecting the cable to the computer.
2-8
Core
Mini USB Port