Benchmark Platinum-Edge [II]: Operation-Service Manual
SECTION 2: OPERATION
2.2 Login and Password Entry
The Edge Controller has multiple levels of password protection.
Level Password
1
No password
2
159
A higher-level password is reserved AERCO Master Technicians (AMT). It is distributed on an
individual basis.
:
To enter a password
1. On the Edge Controller, go to
Password screen appears.
2. Use the number keypad to enter the password (each number appears as a *), then press
Save. You will have access to the functionality associated with the level of the password
entered.
3. Once you have successfully logged into the system, the Main Menu appears. All Edge
functionality is accessed through one of the six Main Menu items.
NOTE:
Full instructions for using the Edge Controller are in the Edge Controller Manual (GF-213).
OMM-0137_E • GF-211 •
12/13/2019
Description
The default. Many parameters are visible but "Read Only."
Allows routine maintenance to be performed. Appropriate for AERCO
Trained technicians (ATT).
Main Menu →
Advanced Setup
Figure 2.2: Enter Password Screen
Figure 2-3: Edge Controller Main Menu
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
→
Access. The Enter
Page 14 of 153