Yamaha XMAX Connected 2023 Owner's Manual page 70

Instrument and control functions
2. Remove the bolt access covers by
removing the quick fasteners.
3. Remove the windshield by remov-
ing the bolts.
4. Remove the bolts, and then install
the bolts in the desired position.
6
1. Bolt
5. Install the windshield to the low
position by installing the bolts, and
then tighten the bolts to the spec-
ified torque. WARNING! A loose
windshield could cause an acci-
dent. Be sure to tighten the
screws to the specified torque.
[EWA15511]
Tightening torque:
Windshield bolt:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
6. Place the bolt access covers, and
then install the quick fasteners.
7. Place the bracket number plate
and then install the bolts with col-
lars.
1
6-32
Handlebar position
The handlebar can be adjusted to one
of two positions to suit the rider's pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.
1
1. Handlebar
EAU46833