Yamaha XMAX Connected 2023 Owner's Manual page 27

pushing the main switch knob and
confirmation with the smart key has
taken place, the main switch can be
turned while the smart key system indi-
cator light is on (approximately 4 sec-
onds).
WARNING
Never turn the main switch to
"OFF", " ", or "OPEN" while the ve-
hicle is moving. Otherwise the elec-
trical systems will be switched off,
which may result in loss of control or
an accident.
TIP
Do not push the main switch knob re-
peatedly or turn the main switch back
and forth beyond normal use. Other-
wise, to protect the main switch from
damage, the smart key system will
temporarily disable and the smart key
system indicator light will flash. If this
occurs, wait until the indicator light
stops flashing before operating the
main switch again.
The main switch positions are de-
scribed below.
ON
1
EWA18720
1. Push.
2. Turn.
All electrical circuits are supplied with
power, and the engine can be started.
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
2. Push the main switch knob and
the smart key indicator light will
come on for approximately 4 sec-
onds.
3. While the smart key system indi-
cator light is on, turn the main
switch to "ON". All of the turn sig-
nal lights will flash twice and the
vehicle power will turn on.
4-8
EAU76502
TIP
If the vehicle battery voltage is
2
low, the turn signal lights will not
flash.
See "Emergency mode" on page
9-36 for information on turning the
vehicle power on without the
smart key.
OFF
1. Turn.
All electrical systems are off.
To turn the vehicle power off
1. With the smart key turned on and
within operating range, turn the
main switch to "OFF".
Smart key system
EAU76511
1
4