Table of Contents
Advertisement
9.
M.2 socket 3
The M2E1 socket allows you to install a PCIe interface M.2 (NGFF) E Key
module.
The M2M1 socket allows you to install a SATA interface M.2 (NGFF) M Key
SSD module.
EMB-APL3
EMB-APL3 M.2 sockets
The M.2 (NGFF) module is purchased separately.
10. Digital I/O connector (10-pin DIO1)
This connector includes 8 I/O lines (In/Out programmable). All of the Digital
I/O lines are programmable and each I/O pin can be individually programmed
to support various devices.
EMB-APL3
EMB-APL3 Digital I/O connector
NOTE: To configure the I/O pins in BIOS, go to the Advanced tab > Digital
IO Port Configuration > DIO Port 1~8. See section 3.3.8 Digital IO Port
Configuration for details.
Chapter 2: Motherboard information
M.2(SOCKET3)
2230
2230_M2E
2242_M2M
2242
DIO1
PIN 1
2-15
Advertisement
Table of Contents
