Track Record - NSR Marine NGR-3000 User Manual

NGR-3000 USER MANUAL
Before setting the anchor watch alarm, set current position as destination.
1) Click the ANC alarm value to edit.
2) Click the digits among 0-9 until the desired digit is got.
3) Turn the knob to move the cursor to the next digit to edit.
4) When the value is set to 0, alarm will be turned off.
The alarm range is (0.01-99.99 nm).
Note:
Anchor watch alarm and arrival alarm are combined to serve a route. After a route is
finished while the destination is arrived at, keep the navigation on the route while setting
ANC. The anchor watch starts.

4.4 Track Record

Click [TRACK] to set the interval of every two recorded dots.
If OFF is selected, the track will not be recorded.
If SPACE is selected, the track will be recorded every certain distance which can be
configured.
21
NGR-3000 UM.E 20230221-08