Operate the menus until the above screen is got. (Please refer to WAYPOINT/ROUTE)
1) When the first line is selected, click [EDIT] to locate the first character to edit.
Click [RENAME] to rename the route desired.
2)
Click the character among A-Z desired,
3)
Click [abc] to change to digit input, then click the number 0-9 desired.
4)
Click [√] to finish.
2.6 Display Modes
There are six display modes: Data, Plotter, Highway, Compass, Satellite and Beacon (which
switches with the Satellite display). Click MENU button on screen to select a display mode.
2.6.1 Data display
The DATA display is the default display mode of the equipment.
①
②
③
Basic data will be displayed in this mode, including position in latitude and longitude,
course, speed, date and time.
NGR-3000 takes about 40 seconds to find position when turned on for the very first time.
6
NGR-3000 UM.E 20230221-08
NGR-3000 USER MANUAL
④
⑤