Track Record - NSR Marine NGR-1000 User Manual

NGR-1000/NGR-3000 USER MANUAL
Before setting the anchor watch alarm, set current position as destination.
1) Select ANC (anchor) from ARV/ANC/OFF.
2) Click the ALARM value to edit.
3) Click the digits among 0-9 until the desired digit is got.
4) Turn the knob to move the cursor to the next digit to edit.
The alarm range is (0.01-99.99 nm).
NOTE:
Anchor watch alarm and arrival alarm are combined to serve a route. After a route is
finished while the destination is arrived at, keep the navigation on the route while setting
ANC. The anchor watch starts.

4.4 Track record

TRACK is to set the interval of every two recorded dots.
If OFF is selected, the track will not be recorded.
If SPACE is selected, the track will be recorded every certain distance which can be
configured.
If AUTO is selected, the track will be recorded every minute or every certain distance which
can be configured, whichever is reached first.
NGR-1000/NGR-3000 UM.E 20190331-04
20