NGR-3000 USER MANUAL
3. NAVIGATION PLANNING
Typically, a trip from one place to another involves several course changes, requiring a series
of waypoints which you navigate to, one after another. The sequence of waypoints leading to
the ultimate destination is called a route. NGR-3000 can automatically advance to the next
waypoint on a route, so you do not have to change the destination waypoint repeatedly.
NGR-3000 can store 30 routes and each route may include up to 100 waypoints.
There are two ways to enter Waypoint and Route.
(1) Click [MENU]-[SETTINGS]-[NAVIGATION] to open the menu.
(2) Click [PLOTTER] in [MENU], then click [WAYPOINT] / [ROUTE] in [OPERATE]
to open the menu.
3.1 Register waypoints
Click [NAVIGATION]-[WAYPOINT LIST] to open the waypoint list.
11
NGR-3000 UM.E 20230221-08