Power On/Off; Adjust Dimmer And Contrast - NSR Marine NGR-3000 User Manual

2.2 Power ON/OFF

⚫
Turn on the power
Press the PWR button to turn on the power. Usually it will take about 2 minutes to find its
position when turned on for the very first time.
The equipment shows receiver status at the bottom of the screen.
GP-2D/ GP-3D
GP-D2D/GP-D3D
GB-2D/GB-3D
GB-D2D/GB-D3D
GL-2D/ GL-3D
GL-D2D/GL-D3D
GN-2D/GN-3D
GN-D2D/GN-D3D
Note: GP-GPS, GB-BDS, GL-Glonass, GN-GNSS.
⚫
Turn off the power
Press and hold down the PWR button for 3s until the screen goes blank.

2.3 Adjust Dimmer and Contrast

There are two ways to adjust the brightness and contrast of the LCD.
- Adjust the brightness in the [SYSTEM SETTING] by clicking [LCD/KEY DIMMER].
- Press the DIM button to adjust the brightness.
Indication Meaning
GPS fix
Differential GPS fix
BDS fix
Differential BDS fix
Glonass fix
Differential Glonass fix
GNSS fix
Differential GNSS fix
4
NGR-3000 UM.E 20230221-08
NGR-3000 USER MANUAL