Turn On And Off The Power; Adjust Dimmer And Contrast - NSR Marine NGR-1000 User Manual

2.2 Turn on and off the power

 Turn on the power
Press the PWR button to turn on the power. Usually it will take about 2 minutes to find its
position when turned on for the very first time.
The equipment shows receiver status at the bottom of the screen.
Indication
GP-2D/ GP-3D
GP-D2D/GP-D3D
BD-2D/BD-3D
BD-D2D/BD-D3D
GL-2D/ GL-3D
GL-D2D/GL-D3D
GN-2D/GN-3D
GN-D2D/GN-D3D
Note: GP-GPS, BD-Beidou, GL-Glonass, GN-GNSS.
 Turn off the power
Press and hold down the PWR button for 3s until the screen goes blank.

2.3 Adjust Dimmer and Contrast

There are two ways to adjust the brightness and contrast of the LCD.
- Adjust the brightness in the [SYSTEM SETTING] by clicking [LCD/KEY DIMMER].
- Press the DIM button to adjust the brightness.
4
NGR-1000/NGR-3000 USER MANUAL
Meaning
GPS fix
Differential GPS fix
Beidou fix
Differential Beidou fix
Glonass fix
Differential Glonass fix
GNSS fix
Differential GNSS fix
NGR-1000/NGR-3000 UM.E 20190331-04