Advertisement
5. Maintenance and Calibration
5.1. Auto Calibration
The balancer utilizes automatic calibration procedure.
Once the balancer is calibrated at installation time, no fur-
ther operator input is required.
5.2. Cleaning the Console
To maintain a brand new appearance of the display, clean
with soft cloth regularly.
Please remove stubborn stains with soft cleaner rather
than strong cleaners such as diluting agent, benzene or
corrosive cleaner as they may damage the display.
ArmorAll wipes are a suitable cleaning product for the
touch screen.
CAUTION
Do not touch the screen with chemi-
cals or solvents on fingers, i.e. brake
cleaner. Doing so will damage the an-
ti-glare protector on the screen.
5.3. Maintenance Schedule
5.4. End User License Agreement
Use of equipment and it's operating software is acknowl-
edgment of agreement to the terms of the End User Li-
censing Agreement ("EULA"). The entire EULA can be
found by scanning the QR Code below.
BM07900-00 SmartWeight® Elite Operations Manual
5.5. Parts Warranty Summary
Hunter Engineering Company warrants new equipment to
be free from defects in material and workmanship under
normal conditions of use for a period of one (1) year from
the date of installation. Exceptions to this warranty are lis-
ted below.
• All circuit boards are warranted for a period of three (3)
• PC's and options installed inside the PC are warranted
• LCD's are warranted for a period of three (3) years.
• Power supplies are warranted for a period of three (3)
• Transducers are warranted for a period of three (3)
• Wheel Balancer motors are warranted for a period of
• Wheel Balancer shafts are warranted for a period of
• Tire Changers are fully warranted for a period of three
• All lift and Hunter TCR1 power units are warranted for a
• Normal wear items are not covered with the exception
• Replacement parts purchased through the Hunter Serv-
Warranted parts may be replaced with new or refurbished
parts at the discretion of Hunter Engineering Company.
This warranty does not include normal wear items and
does not apply to any product which has been subject to
abuse, misuse, alterations, accident, exposure to the ele-
ments, tampering, unreasonable use, or failure to provide
reasonable and necessary maintenance.
All warranty claims must be made to your local Hunter
Service representation. Labor warranties can vary and ad-
ditional policies and restrictions may apply.
This is Hunter Engineering Companies' only warranty with
respect to new equipment
See our document library at www.Hunter.com for addition-
al details.
years.
for a period of three (3) years.
years.
years.
three (3) years.
three (3) years.
(3) years with the exception of consumable parts and
TCR1 power units.
period of two (2) years.
of batteries, which are covered for a period of six (6)
months.
ice Center and no longer covered by machine warranty
are warranted for a period of six (6) months.
Page 7 of 7
Advertisement
