Advertisement
4.
Calibration & Maintenance
4.1
Auto Calibration
The balancer utilizes an eCal™ automatic calibration procedure. Once the balancer is calibrated at installation time, no
further operator input is required.
4.2
Cleaning the Monitor
To maintain a brand new appearance of the display, clean with soft cloth regularly. Do not touch screen with chemicals/
solvents on fingers. Doing so will damage the screen's anti-glare protection.Remove stains with a soft cleaner. Corro-
sive cleaner may damage the display. ArmorAll wipes are a suitable cleaning product for the touch screen.
4.3
Maintenance Schedule
4.4
End User License Agreement
Use of balancer and it's operating software is acknowledgment of agreement to the terms of the End User Licensing
Agreement ("EULA"). The entire EULA can be found by scanning the QR Code below.
Balancing Procedures
Figure 19: Use QR Code to access EULA
11
Advertisement
