About Mpx; What Types Of Cabling And Run Lengths Does Mpx Work With - FLIR M3100E Series Instruction Manual

7

About MPX

FLIR MPX™ is a revolutionary video surveillance format powered by HD-CVI technology.
MPX delivers megapixel picture quality over coax, meaning you can upgrade your existing
analog systems to HD resolution (1MP & 2.1MP) over a single coax cable (RG59 & RG6
compatible).
NOTE
The DVRs covered in this manual are compatible with cameras.

7.1 What types of cabling and run lengths does MPX work with?

MPX allows a maximum cable run of up to 2300ft (700m) @ 720p or up to 2000ft (610m)
@ 1080p, depending on the type of cable used (see below). It is required that the cable
runs be made in a single run between camera and DVR, as daisychaining multiple cable
runs together can prevent the DVR from getting a picture from the camera or may impact
image quality. MPX supports standard UTP baluns for use with CAT5E or CAT6 cabling in
your installation. The baluns should have a 12V and BNC connection at both ends. You
can run up to 300ft (91m) per segment of CAT5E or CAT6.
Cable Type
RG59 20AWG Conductor 95% Braid CSA/UL or C
(UL) approved
RG6 20AWG Conductor 95% Braid CSA/UL or C
(UL) approved
Analog CCTV Balun
1. Long cable runs over 1000ft may be affected by electromechanical interference (EMI), which can increase the
amount of noise in the picture in some installations.
#LX400028; r.27370/27370; en-US
Maximum Run Length
720p: Up to 1500ft (455m)
1080p: Up to 1000ft (300m)
720p: Up to 2300ft (700m)
1080p: Up to 2000ft (600m)
720p: Up to 300ft (91m)
1080p: Up to 300ft (91m)
1
13