Advertisement
Wake on Touch Function
The touch display supports wake-on-touch functionality when the PC is in sleep mode. To enable this, please ensure
that the BIOS settings have enabled USB support during the S4 sleep cycle.
For touch displays with RTC function enabled, please make sure the Touch on Sleep mode is enabled in the OSD
menu, by selecting "Miscellaneous" and then enabling the "Touch" setting.
If you still are having trouble with Wake on Touch, please download the latest Elo drivers to allow the touch display
to use this function. Refer to Section 2, Section "Installing the Touch Technology Software Drivers" to find
instructions to download the latest touch drivers.
SW601960 Rev. F, page 20 of 31
User Manual – 32/42/43/5543L Series IDS
Advertisement
