Advertisement
Rear VESA Mount
For ET3243L:
A four-hole 400x200mm mounting pattern for M6 screws is provided on the rear of the monitor. The VESA
FDMI-compliant counting is coded: VESA MIS-F, 400, 200, 6.
For the ET4243L/ET4343L/ET5543L:
A four-hole 400x400mm mounting pattern for M6 screws is provided on the rear of the monitor. The VESA
FDMI-compliant counting is coded: VESA MIS-F, 400, 400, 6.
Refer to www.elotouch.com for dimensional drawings.
SW601960 Rev. F, page 13 of 31
User Manual – 32/42/43/5543L Series IDS
Advertisement
