Table of Contents
Advertisement
Water hardness
The display changes to the screen for
setting the water hardness.
- The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g., between 10-16 gpg (10-15 °d),
always program the dishwasher to
the higher value (16 gpg in this exam-
ple).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gpg
The dishwasher is programmed at the
factory for a water hardness level of
1 gpg (1 °d).
Use the arrow buttons to select
the hardness of your water supply
and confirm with OK.
See "Settings menu, Water hardness"
for more information on setting the
water hardness.
Initial commissioning
Finally, the notes
and
Set up complete
display.
After these notes are confirmed with
OK, the messages
may appear.
Refill rinse aid
Add salt and rinse aid if necessary
(see "Before using for the first time –
Reactivation salt" and "Rinse aid").
Confirm the notes with OK.
The program selected will appear in the
display briefly and the indicator light for
the program selected will come on.
The display will then show the esti-
mated program duration for the pro-
gram selected.
These basic settings will be saved after
the dishwasher has been through one
complete program.
Miele@home enabled
will appear in the
and
Refill salt
21
Advertisement
Table of Contents
