Switching The Headset On/Off - Sennheiser VMX100-B Instruction Manual

• The LED
flashes red.
• Three beeps are heard in the headset every 30 seconds (3x).
• Less than five minutes of talk time are left.

Switching the headset on/off

Open the microphone boom
The headset is switched on. The
LED indicates the current operat-
ing mode:
• If the LED
blue, the headset is already
paired to a mobile phone. The
headset is therefore ready to use.
• If the LED
in red and blue, the headset is not yet paired to a mobile
phone. Pair it as described under "Pairing the headset to mo-
bile phones or other Bluetooth devices" on page 11.
• If the headset is already paired to a mobile phone and if there
is an incoming call on your mobile phone, the call is answered
immediately by opening the microphone boom
further action.
To switch off the headset:
Close the microphone boom
The headset is switched off. The LED
stops flashing.
All settings are saved. The battery lasts
longer, if you switch off the headset
when not telephoning with it.
10
.
flashes slowly in
flashes alternatingly
.
without any