Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sennheiser MB Pro1
Summary of Contents for Sennheiser MB Pro1
- Page 1 MB Pro 1 MB Pro 2 Professional Bluetooth solutions Instruction manual...
-
Page 2: Table Of Contents
Replacing the ear pads .....................21 Replacing the headset’s rechargeable battery ............22 Storing the headset ....................23 Updating the software of the product ..............24 If a problem occurs ....................26 Specifications ......................27 Manufacturer Declarations ..................28 MB Pro1 | MB Pro 2... -
Page 3: Important Safety Information
The risk is to be borne by the user. Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications. Sennheiser is not liable for damages resulting from the loss of connection due to flat or overaged rechargeable batteries or exceeding the Bluetooth transmission range. -
Page 4: Introduction
• Room experience – for a more realistic sound and increased call comfort (MB Pro 2 only) • Sennheiser voice clarity – for a natural speech and listening experience • Ultra noise-canceling microphone – for perfect speech transmission • Large leatherette ear pads – for exceptional wearing comfort and powerful sound •... -
Page 5: Package Contents
Quick Guide *not included A list of accessories can be found on the product page of the headsets at www.sennheiser.com/cco. For information on suppliers, contact your local Sennheiser partner: www.sennheiser.com/cco > “Where to Buy”. MB Pro1 | MB Pro 2... -
Page 6: Product Overview
Product overview Product overview Overview of headsets MB Pro 1 MB Pro 2 Windshield Headset LED Microphone Multi-function button Battery compartment Audio button Ear pad Charging contacts Name plate MB Pro1 | MB Pro 2... -
Page 7: Overview Of The Headset Chargers
The LED flashes. The LED flashes once every 3 seconds. The LED flashes 3 times per second. The pictogram “i” Notes marked with the pictogram “i” provide important information on the use of the product. MB Pro1 | MB Pro 2... -
Page 8: Overview Of The Led Indications
15 hours; battery is fully charged After 30 seconds, the LED goes off. Press the multi-function button to check the battery charge level. When the battery is fully charged, the LED lights up blue constantly. MB Pro1 | MB Pro 2... -
Page 9: Overview Of Buttons
Transfers a call from the headset to the mobile phone Switches the headset on/off Accepts an incoming call and puts the active call on hold (managing two calls) Redials the last number Toggles between two calls (managing two calls) Activates pairing mode MB Pro1 | MB Pro 2... - Page 10 Changes the direction of the Audio button‘s volume up/ down function; MB Pro 2 also changes the left and the right stereo channel Activates/deactivates the room experience for enhanced call comfort during calls (MB Pro 2 only) MB Pro1 | MB Pro 2...
-
Page 11: Putting The Headset Into Operation
When the battery charge level drops below 15 minutes of talk time, the LED flashes red and the voice prompt “Recharge headset” is announced several times. When the battery is flat, the headset switches off automatically. 10 | MB Pro1 | MB Pro 2... -
Page 12: Pairing The Headset With Bluetooth Devices
Plug the Bluetooth USB dongle into the USB port of your PC. Follow the instructions in the next chapter, as well as those given in the in- struction manual of your Bluetooth USB dongle. MB Pro1 | MB Pro 2 | 11... - Page 13 All available devices in the proximity of the mobile phone are displayed. From the found Bluetooth devices, select “Sennheiser MB Pro 1” or “Sennheiser MB Pro 2“ to pair the headset with the mobile phone. If necessary, enter the default PIN code “0000”.
-
Page 14: Using The Headset
MB Pro1: ear pad rests comfortably on your right or left ear. – MB Pro2: the ear pads rest comfortably on your ears. Left Right 2-3 cm MB Pro 1 MB Pro 2 MB Pro1 | MB Pro 2 | 13... -
Page 15: Switching The Headset On And Connecting It
+ paired connected ”power off“ If the headset has not been used for more than 30 minutes and no devices are connected, the headset automatically switches off to conserve battery power. 14 | MB Pro1 | MB Pro 2... -
Page 16: Activating/Deactivating The Voice Prompts
Press the Audio button until you hear a confirmation beep. The room experience is now activated or deactivated. beep - Room experience activated/ deactivated MB Pro1 | MB Pro 2 | 15... -
Page 17: Changing The Volume
“Swap volume keys” is announced in the headset. MB Pro 2: When the direction of the Audio button‘s volume up/down function is changed, the headset’s left and right stereo channel is also changed to provide optimum stereo sound. “Swap volume keys“ 16 | MB Pro1 | MB Pro 2... -
Page 18: Making Calls Using The Headset
When the voice prompts are disabled, you hear a beep in the headset. When you listen to music, the music is paused until you end the call. This function is not supported by all mobile phones. MB Pro1 | MB Pro 2 | 17... - Page 19 Voice prompt Activates voice dialing ”Voice dial“ Cancels voice dialing – Say your voice command, e.g. “Call Jane”. The Bluetooth device dials Jane’s number. Some voice dial systems require an internet connection. 18 | MB Pro1 | MB Pro 2...
-
Page 20: Managing Multiple Calls
If you put an active call on hold (toggling): Press the multi-function button again: Duration Active Function call incoming call Ends the active call and makes the call on hold active (phone dependent) MB Pro1 | MB Pro 2 | 19... -
Page 21: Restoring Factory Default Settings (Reset)
– “Phone one connected” for the first mobile phone – “Phone two connected” for the second mobile phone or – “Dongle connected” for the Bluetooth dongle. 1. ”power on“ 2. „... connected“ 20 | MB Pro1 | MB Pro 2... -
Page 22: Cleaning And Maintaining The Headset
Replacing the ear pads For reasons of hygiene, you should replace the ear pads from time to time. Spare ear pads are available from your Sennheiser partner. Carefully remove the old ear pad from the ear cup. Attach the new ear pad to the ear cup by pressing firmly around the ear pad. -
Page 23: Replacing The Headset's Rechargeable Battery
Carefully open the battery compartment and loosen the connector plug of the rechargeable battery. Spare rechargeable batteries are available from your Sennheiser partner. Only use spare rechargeable batteries recommended by Sennheiser. Replacing the rechargeable battery of the MB Pro 1 headset Open the battery compartment cover. -
Page 24: Storing The Headset
If you do not use the headset for extended periods of time: Charge the rechargeable battery every 3 months for about 1 hour. Store the headset in a clean and dry environment. MB Pro1 | MB Pro 2 | 23... -
Page 25: Updating The Software Of The Product
Use a USB cable with mini USB plug to connect the headset to your computer. Start the “Sennheiser Updater”. The “Sennheiser Updater” compares the installed firmware version of the headset to the latest firmware version available for download. If your firm- ware needs to be updated, upgrade to the latest version according to the instructions of the “Sennheiser Updater”. - Page 26 The “Sennheiser Updater” compares the installed firmware version of the Bluetooth USB dongle to the latest firmware version available for download. Upgrade to the latest version according to the instructions of the “Sennheiser Updater”. MB Pro1 | MB Pro 2...
-
Page 27: If A Problem Occurs
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at www.sennheiser.com/cco. -
Page 28: Specifications
HSP (v1.2), HFP (v1.6), A2DP (v1.2) Output power of headset 9 dBm/7.90 mW Output power of BTD 800 USB 8 dBm/ 6.30 mW Typical sensitivity of headset –89 dBm Typical sensitivity of BTD 800 –89 dBm MB Pro1 | MB Pro 2 | 27... -
Page 29: Manufacturer Declarations
Before putting the product into operation, please observe the respective country specific regulations! Trademarks The Bluetooth word mark and logos are registered trademarks owned by Blue- tooth SIG, Inc. and any use of such marks by Sennheiser is under license. 28 | MB Pro1 | MB Pro 2... - Page 30 Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Publ. 02/14, A01...