Transport And Storage; Techncial Data - Hyundai HCOMBI25 Original Instructions Manual

8. TRANSPORT AND STORAGE

When the 4-in-1 multifunction machine is not used for an extended period of time (1 month), the following
measures should be taken:
- Empty the oil and fuel tank.
- Disassemble and clean the thread spool and cutting blade.
- Dry the spool of wire and the cutting blade using a cloth.
- Rub the outside of the machine using a soft, damp cloth.
- Store the machine in an enclosed and well ventilated place. Keep the machine so that it is not
accessible to children.
- Store the machine in a dry place.
- The cutting blade, pruning machine and hedge trimmer must be properly packaged to prevent cuts.
- Use the baffles on cutting accessories with a metal knife.
9. TECHNICAL DATA
Engine information
Type of engine
Volume of the fuel tank
Max engine speed
Engine idling speed
Clutch engagement speed
Engine displacement
Maximal power
Carburettor
Spark plug
Brushcutter
Unit without cutting attachment, empty tank
Cutting diameter
Cutting thickness
Number of cutting teeth
Blade hole centre diameter
Maximum rotational frequency of the spindle
Gear ratio
Engine speed with cutting attachment
Cutting blade
Vibration ahv (front handle)
Vibration ahv (rear handle)
Vibration ahv (rear handle)
RY1E36F, 2-stroke engine
900 cm³
Max. 10000 min-¹
3200±300 min-¹
4500 min-¹
25,4 cm³
0,9 kW
MZ11A/HUAYI, MR11C1/HLIC, 11S39/Stable
BOSCH L8RTF, NHSP LD L8RTF, TORCH L7RTC,
NGK BP MR7A
6,7 kg
255 mm
1.4 mm
Single piece (three teeth metal blade)
25.4 mm
7500 min
-1
4:3
Royal Garden, 10000 min-¹
10000/min
ahveq=6,20 m/s 2 , k=1,5 m/s
ahveq=6,46 m/s , k=1,5 m/s
2
26
2
2