Table of Contents
Advertisement
equipment. Do not modify the unit.
-
Do not work with the tool when it rains, in bad weather or in a damp environment. Do not use the
machine when there is a risk of thunderstorms and storms.
-
Only work outdoors, under daylight or under artificial lighting.
Always carry the appliance by its handle
-
Tie long hair in a way to prevent them from coming into contact with the blades. Do not wear jewelry
-
and loose clothing when operating the machine.
-
The appliance should never be used near people, especially children and pets. Stop the operation
immediately if this condition is not met. In all cases, ensure a safe area of at least 15 meters
around the work area.
-
The operator is responsible for accidents caused to others.
-
Always take a stable working position. Make sure you step on the slopes. Take extreme caution when
working on slopes.
-
Do not use the tool when you are tired, sick or under the influence of alcohol or drugs.
Take regular breaks to reduce the risk of fatigue.
-
Never leave the machine unattended. Switch off and and put it out of the reach of people if you are
-
away from work.
-
Put the guard on the blade when it is being transported.
-
This device is not intended for use by persons (including children) whose physical, sensory or mental
capacities are reduced, or by persons without experience or knowledge, unless they have been able to
benefit, By means of a person responsible for their safety, supervision or prior instructions concerning
the use of the appliance. Children should be supervised to ensure that they do not play with the
appliance
-
Always keep this manual at hand.
-
The device must always be used fully assembled and secured.
Store the tool with its blade guard and out of the reach of children
-
-
Never use an incomplete or unauthorized tool.
-
Local laws may restrict the use of this tool.
-
Check the tool regularly and before each use to observe any impact or damage.
-
Always use the tool with the supplied harness.
Secure the machine during transport to prevent loss of fuel, damage or injury; always install the
-
protection device on the blade, check the cap of the fuel tank, and do not transport the tool upside down
Check that the cutting attachment stops turning when the engine idles
-
-
Clean and maintain the tool before storage (see the chapters on this manual). Bring maintenance after
each use according the instructions of this manual. Improper maintenance can reduce the lifetime of the
tool, bring bad results and wear the tool and its accessories.
-
Check the tool before and after use. Check for loose fasteners, fuel leaks and damaged parts, such as
cracks in the cutting attachment. If the tool is damaged, if parts are missed or meet some dysfunctions,
do not use the tool and bring it to a service agent for inspection and reparation.
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of injury and
damage remain. The following hazards may arise in the structure and design of this product:
-
There are harmful health consequences resulting from the emission of vibrations if the product is used
for long periods of time or not properly managed and properly maintained.
-
There is risk of injury and property damage due to attachments or broken the sudden impact of hidden
objects when using cutting.
-
Risk of injury to persons and property caused by flying objects.
Prolonged use of this product exposes the operator to vibration and can produce so-called "white
-
finger" disease. To reduce the risk, wear gloves and keep your hands warm.
If any of the symptoms of "white finger syndrome" occur, seek immediate medical attention. Symptoms
-
of the "white finger" include numbness, loss of sensitivity, tingling, tingling, and pain, loss of strength,
color changes or skin condition. These symptoms usually appear on the fingers, hands or wrists. Risk
increases at low temperatures.
10
Advertisement
Table of Contents
