Adjusting The Position Of Labels - Seiko SLP100 User Manual

Changing Labels and Printer Care
Chapter 3

Adjusting the Position of Labels

If you find the labels are advancing at an angle, it's easy to
realign them. Follow these steps:
1 Swivel the label cover open and remove the print engine
cover by pulling forward on the tabs at the top of the
cover.
2 Release the pressure on the label stock by moving the
platen release lever forward.
Remove the print engine cover
3 Realign the label stock so it is straight.
4 Return the platen release lever to the locked position.
5 Make sure the labels feed through the slot.
6 Insert the tabs on the lower edge of the print engine
cover into the slots on the SLP and push the top edge for-
ward until the cover snaps into place.
3-4
Release the platen lever
Smart Label Printer Models 100, 200 and 240