Seiko SLP100 User Manual page 20

3 Remove the spindle from the SLP and insert the label roll
on the spindle.
4 Insert the labels and spindle into the SLP. If using an SLP
200 or 240, adjust the guides to fit the labels as shown
below.
SLP 200/240
5 Insert the free end of the label roll, label side down, into
the slot on the back of the printer. Push the label stock
into the slot until you feel a slight resistance. Continue
pushing gently. The SLP automatically feeds the labels
through and aligns the end in the exit slot.
If the label end doesn't appear through the slot:
Press and release the
the labels.
2-8
Chapter 2
SLP 100
form feed button to advance
Smart Label Printer Models 100, 200 and 240
Getting Started